CE155 - Real-Time Data Monitoring (RTDM)
This code example shows how to use Real-Time Data Monitor (RTDM) to create an alternative link between Host PC and target device for debugging applications in real-time. Works for AC Induction, Brushless DC and Permanent Magnet Synchronous Motors.
About this Code Example
This code example shows how to use Real-Time Data Monitor (RTDM) to create an alternative link between Host PC and target device for debugging applications in real-time using MPLAB DMCI ( MPLAB 8.10 or higher).
It is required to include the RTDM.C file and RTDM.h into the application project in order to send/receive data through the UART to/from the host PC running under MPLAB DMCI environment. DMCI included in MPLAB 8.10 or higher is ready and enabled to support data exchange between the host PC and target device. Previous versions of DMCI do not support this feature. RTDM is currently supported by PIC24H, dsPIC30F and dsPIC33F processors.
- Jul 22, 2011
Initial code release on 12/10/09.
- Current Version:1.0.0
- Created:Jul 22, 2011
- Updated:Feb 26, 2015
- MPLAB Version:8.10 or above
- C Compiler:MPLAB C30 3.30 or above, DMCI not compatible
- Development Tools:MPLAB Real ICE or ICD 2 Explorer 16 Dev Board with dsPIC33FJ256GP710 PIM
- Supported Devices:PIC24H, dsPIC30F, dsPIC33F